Wanting to install insulation yourself. We've got a range of hints and tips from our experience as New Zealand's largest insulation installer avoid the potential pitfalls.
DIY Insulation Install: Hints, Tips and Hazards
If you're looking to save money by installing your insulation yourself, here are some hints and tips to share that can get you well prepared and help you avoid a range of potential hazards.
Smart Energy Solutions is New Zealand's largest insulation installer having insulated over 35,000 homes as part of the EECA: Warm Up New Zealand insulation programmes so we know what we're doing and you can benefit from our experience.
If you're looking at insulating your rental properties, you'll need to ensure you meet the new Residential Tenancy Act requirements around product and including a copy of a Statement of Insulation in your lease agreements. Read more here.
Before You Start
- Are you up for it? Installing insulation underfloor or in ceilings means crawling around in confined, dirty dusty spaces for several hours. Check that you are comfortable working in closed spaces and will be able to manoeuvre the bulk insulation before committing to doing it yourself. You'll be hunched over for quite some time.
- What's in your roof/under floor? You never quite know what's under the floor of your house or in your ceiling. Apart from the usual mud, dust, spiders and ants we regularly come across wasp nests, feral cats, and more.
- Do you have a helper? We work in teams of 2-3 people - not only for speed and safety but also to best physically handle the insulation. It's not heavy but it is bulky and it makes a huge difference having someone to assist.
- Read the instructions: you're working around alot of electrical cabling and potential fire hazards. Make sure you follow the manufacturer's instructions for their materials BEFORE you buy.
- Free Delivery: Free delivery* offer available until the end of May 2017 - we'll do a free measure, quote and delivery service to help give you the best possible head start.
Measuring & Buying
- Consider the different insulation materials available including polyester, glasswool, polystyrene etc. There are a range of prices but you tend to get what you pay for and some are more difficult or unpleasant to work with than others - for example glasswool/fibreglass insulation can cause skin allergies and so you'll need goggles, face-mask and complete coveralls. We recommend non-itchy Mammoth polyester insulation for DIY.
- Select the right R-Value for your location: there are three different climate zones which have different R-Value requirements under the building code.
- Choose the best format for your home. There are sections, rolls of blanket, loose fill etc. For underfloor and walls self-supporting sections are best and safest for DIY install. In ceilings we recommend blanket rather than sections so there is no heat loss through the joists, while for confined ceiling spaces that are hard to reach loose-fill is a suitable option.
- Measure up carefully. Take care to measure well so you order the correct insulation widths for underfloor or walls as the insulation needs to fit well between the joists.
- Don't buy too much: For ceilings a good starting order for blanket insulation is 75% of the house's footprint - you can always order an extra bale but returning surplus might be a problem.
- Rental property compliance: The new Residential Tenancy Act requires a minimum R value for rental properties. Read more about compliance and products here.
Doing It Right
- Avoid gaps: Heat flows through gaps like a sieve so the quality of your installation makes a big difference. Gaps around the edge of wall insulation can reduce its effective R value by approximately 3% for every 1mm gap and missing sections of insulation in ceiling, wall or underfloor severely compromises the whole project.
- Keep the necessary gaps: you need to maintain clearances around incandescent downlights, chimneys and ducts.
- Mind your step: Manoeuvring yourself and large bales of insulation around in a ceiling is a challenge. Any money you may save installing insulation yourself can be lost by a misstep resulting in a foot through the ceiling.
- Electrical Wiring: Underfloor and in the ceiling there is wiring that needs to be safely managed when installing insulation for your personal safety to avoid electrocution. For DIY underfloor insulation we recommend you use self-supporting forms of insulation that require no staples.
- Existing Foil Insulation: foil conducts electricity and on several occasions when our assessors are measuring up underfloor insulation they have discovered the whole underfloor foil has been electrically live. Take extreme care when working with foil near electrical wiring to avoid serious injury.
- Downlights: To avoid creating a fire hazard, it is critical that insulation is installed correctly around downlights, chimneys and power cables.
DIY or Professional Installation?
If this is all a bit intimidating then consider getting us in to give you a quote for supply & install. We make the process easy and some regions will let you put professionally installed insulation on your Local Council rates so that you can pay it off over time at a very modest interest rate.
Our quotes are free and no-obligation so what have you got to lose?
We recommend Mammoth polyester insulation for DIY because it is easy to handle (no itching & scratching) and the friction-fit products underfloor help you install safely and snugly. You can watch Mammoth's DIY video here.
* Free delivery of a minimum of 4 bales available until 31 May 2017 limited to properties within 50km of the nearest Smart Energy Solutions branch - refer to website for locations. Offer limited to retrofit insulation for home owners and landlords only, and is restricted to one free delivery per property.